Warning message

• 1.This device uses four types of lasers (strong laser radiation), which may cause the following accidents:
  1. Ignite flammable materials in the surrounding area;
  2. During laser operation, other radiation and harmful gases, toxic gases, or odorous gases may be generated due to the different objects directly targeted by the laser;
  3. Direct exposure to laser radiation can cause harm to the human body.
  Therefore, operators must maintain a distance from the equipment and wear protective equipment (such as goggles, protective covers, protective clothing, or fire-fighting equipment). It is strictly prohibited to stack flammable and explosive materials around the workbench and equipment, and it is necessary to maintain good ventilation in the working environment.
• 2. There may be risks during laser operation, and users should carefully consider the material of the carved object to be suitable for laser operation.
• 3. The working voltage of the equipment should be powered by a suitable adapter, and it is strictly prohibited to operate under overload or unstable voltage. If the grounding wire of the power supply (such as the power strip) used in the power plug of this product is not effectively functioning, it is not allowed to plug in the power supply, otherwise there is a very dangerous risk of electric shock.
• 4. The internal configuration of this product is very precise and dangerous laser source components. It is strictly prohibited to place the equipment near electrical appliances with strong electromagnetic interference, as this may cause electromagnetic interference to them. When the laser source is turned on, laser light will be emitted at a speed, and users must avoid direct exposure to the laser beam.
• 5. It is strictly prohibited to place any unrelated total reflection or diffuse reflection objects in the equipment to prevent laser reflection on the human body or flammable materials.
• 6. Before using this product to carve objects, please ensure that the emissions generated by laser irradiation on the carved object comply with local laws and regulations.

Safety operation guidelines and precautions

• 1. Before starting to install the laser engraving machine, please first check that the equipment is intact and that the laser mirror is clean and free of dirt.
• 2. Installation specifications: Before starting to operate the laser engraving machine, please refer to the user manual to fix the host properly to avoid falling or damaging it due to unstable placement.
• 3. Please make sure to power the device according to the power supply power and power type indicated in the user manual.
• 4. Before starting the laser engraving, please ensure to take safety measures, such as wearing goggles to prevent laser eye injury, wearing protective clothing to prevent laser skin injury, removing unrelated items to prevent unnecessary damage caused by laser irradiation, especially removing flammable and explosive materials to prevent fire.
• 5. When starting to carve objects after the laser is turned on, do not move the device to prevent it from stopping working due to self-protection, and even affecting the final effect of the carving work due to the displacement of the carved object.
• 6. If it is necessary to move the device or the carved object, please do not move the device or the carved object during laser work before starting or after the carving is completed.
• 7. Due to the inherent danger of lasers, do not allow minors, children, or individuals without self-protection awareness to operate or approach equipment in operation.
• Before using this product to carve objects, please check that the carved object will not release toxic and harmful gases during the laser burning process to avoid poisoning accidents.
• 9.If any odor or smoke is found during the carving process, please use a fan to blow it away in a timely manner or place it in a spacious and ventilated place for operation.
• 10.Before using this product to carve objects, it is necessary to examine whether the carved object has total reflection or diffuse reflection characteristics. Special attention should be paid to safety protection for such objects (it is recommended to use a whiteboard pen to paint the carved area black before carving).
• 11. Do not use a laser engraving machine to directly irradiate human or pet skin or eyes to avoid irreversible damage.
• 12. You have carefully read the user manual of the laser engraving machine and understand how to operate this product correctly, and agree to the disclaimer below.

3.Disclaimers

4.Privacy Policy